:: JEEP YJ
|
| |
YJ FRONT BUMPER NEW! |
|
 |
This Trail Boss Front YJ Bumper is manufactured from 3/16” thick HRPO steel finished in a durable satin black powder coat. The Trail Boss Front YJ Bumper features integral winch mounting, which eliminates the need to purchase a separate winch mount. The bumpers also feature pre-drilled mounting holes for use with the Kilby Steering Box Skid Plate. Two massive 1” thick fully welded front clevis mounts ensure secure attachment points and are right hand drive (RHD) compatible.
Installation notes:
- For winch installation, a Kilby “hawse” or “roller” fairlead mount (sold separately) is required.
48" Bumper
45 lbs. 55x14x9
YJ48F $350.00 $300.00
[View Instructions]
|
|
| |
::FAIRLEAD MOUNTS |
|
Kilbys Fairlead mounts are manufactured from 1/4” thick HRPO steel, gusseted for superior strength, and finished in a durable satin black powder coat. The RFM-1 and RFM-3 mounts are compatible with most aftermarket roller or hawse type fairleads. The RFM-2 mount includes a signature billet aluminum fairlead designed specifically for use with synthetic type rope to reduce wear and increase lifespan. These mounts are specifically designed to fit Kilby Trail Boss Front TJ, YJ & CJ Front Bumpers. Roller/Hawse Fairlead mounting plate only (Roller or Hawse Fairlead must be purchased separately).
Installation notes:
- For use with Kilby Trail Boss Bumpers only.
Roller Fairlead Mount
8 lbs. 19x7x7
RFM-1 $90.00
|
|
Aluminum Hawse Fairlead for use with poly winch rope and mounting plate.
Hawse Fairlead Mount
9 lbs. 19x7x7
RFM-2 $140.00
|
|
|
::LICENSE PLATE HOLDER |
|
The Kilby Removable License Plate Holder is the easy way to attach your license plate to the roller fairlead. Made from .090 aluminum and powder coated in a satin black finish, the holder securely clips to the rollers. When you need to use the winch, the mount pops completely off without tools. Assembly is simple and 100% bolt-together.
Installation Notes:
- Fits full size roller fairleads only.
2lbs. 12x10x4
LPH $38.00
|
|
| |
YJ REAR BUMPER NEW! |
 |
The Trail Boss Rear YJ Bumper is manufactured from 3/16” thick HRPO steel finished in a durable satin black powder coat. The bumper securely attaches to the rear of your YJ and includes a heavy-duty backing plate and additional side frame braces for maximum strength. The 2” accessory receiver is integrated into the bumper for increased ground clearance. Two massive 1” thick, fully welded clevis mounts provide secure attachment points.
Installation notes:
- Minor drilling required.
- The fuel tank will need to be loosened and/or removed for mounting access during installation.
55 lbs. 55x14x9
YJ54R $400.00
|
|
|
::YJ GAS TANK SKID |
|
The Kilby YJ Gas Tank Skid Plate is made from 3/16” steel and powder coated in satin black to blend in under your Jeep. The skid plate protects the rear mounted fuel tank better than the factory sheet metal shield, which is extremely vulnerable to rock impacts. The skid plate is designed to provide maximum side and differential clearance. The skid plate installation is simple using the factory mounting points and hardware.
Installation Notes:
- Fits 1987-1995 YJ models with factory 20 gallon fuel tank.
- 100% bolt-on installation.
- No body lift required.
67 lbs. 36x22x13
YJ-GTSP $285.00
|
|
| |
::YJ BELLY SKID NEW! |
| |
The Kilby YJ Belly Skid Plate is made from 3/16” steel and replaces the factory belly skid with a heavier duty trail-ready unit that provides maximum protection and increased ground clearance. The skid comes in raw steel that is ready for paint or powder coating if desired. Installation is simple and 100% bolt-on.
Installation Notes:
- 100% bolt-on.
- Can be used with or without engine skid plate (YJ-ESP).
38 lbs. Bare Steel
YJ-BSP $340.00
|
|
| |
YJ ENGINE SKID COMING SOON! |
| |
The Kilby TJ Engine Skid Plate is made from 3/16” steel. The skid plate protects the engine oil pan from rock impacts without sacrificing ground clearance. The skid comes in raw steel that is ready for paint or powder coating if desired. An access opening is provided for oil changes.
Installation Notes:
- Will not work with factory belly skid plate.
- Installation requires Kilby Belly Skid Plate (YJ-BSP, sold separately).
|
|
| |
|
|
Protect your exposed steering gear box from disaster with a Kilby heavy-duty skid plate. Manufactured from 3/16” thick HRPO steel finished in a durable satin black powder coat, the skid is laser cut and formed for a perfect fit. The skid fits vehicles with factory or most aftermarket bumpers. Available in standard and right-hand drive versions.
Installation notes:
7 lbs 10x10x5
KE-YJ-GBSP $60.00
7 lbs 10x10x5
KE-YJ-GBSP-R $60.00
Right Hand Drive Version
|
|
|
::YJ HOODLIFT |
|
Finally, a simple fix for what many Jeep owners consider to be a “factory oversight”. The YJ Hood Lift eliminates the need to fight with the factory prop rod when raising the hood. After installation, raising the hood becomes a simple one-handed operation. The Hood Lift can also be adjusted for increased under-hood access! The kit comes complete with all necessary hardware. Installation is simple and requires only minor drilling.
Installation Notes:
- Requires minor drilling
- For factory hoods only. If using a heavier aftermarket hood, contact us for a vehicle-specific kit.
5 lbs. 19x4x4
HOODLIFT $130.00
|
|
|
:: JEEP DESKTOP METAL ART
Made from 11 gauge steel, powder coated black. This desktop metal art will remind you all day long that you'd rather be on the trail! Just use it for decoration, or put it to work by holding envelopes & buisness cards.
MA-001
$15.00 Each
|
| |
