:: JEEP JK |
| |
::JK REAR BUMPER & TIRE CARRIER |
|
Kilby's JK Rear Bumper is fabricated from 3/16" HRPO Steel, internally reinforced and formed to complement the JK's rugged appearance. The stout tire carrier boasts a massive 2" x 3" .120 wall steel framework anchored on a bulletproof twin taper bearing pivot system. Four contact points and adjustable heavy-duty tension latch ensure rattle-free operation. The carrier accepts up to a 38" tire. The unit is powder coated in a durable black texture finish. The system also includes a stylish new 3/16" steel 3rd brake light/ CB antenna mount (light/antenna not included).
- Installation is simple and requires only minor drilling for spare tire mount fitment.
JK-62R
[View Instructions]
|
|
|
::JK STEERING STABILIZER RELOCATION |
|
The JK Steering Stabilizer Relocation Bracket moves the stabilizer up and out of harm's way. The beefy 3/16” steel bracket is powder coated in a durable satin black finish. All necessary hardware is included. Installation is simple and 100% bolt-on other than trimming the factory tabs if desired for cosmetic reasons.
Installation Notes:
- Fits 2007-'10 Jeep Wrangler JK.
1 lbs 7x5x3
JK-SSR
[View Instructions]
|
|
| |
::JK FRONT BUMPER |
|
The Trail Boss Front JK Bumpers are 47” wide and manufactured from 3/16” thick HRPO steel finished in a durable satin black powder coat. This fully functional bumper also increases ground clearance! The Trail Boss Front JK Bumper features an integral winch mount with internal roller fairlead, which eliminates the need to purchase a separate winch mount. Two 1” thick fully welded front clevis mounts ensure secure attachment points and are right hand drive (RHD) compatible. Maximize your protection with the addition of one of our optional heavy-duty 3/16” steel skid plates.
Installation notes:
- For winch installation, a “hawse” type fairlead (not included) is required.
- Optional skid plate (2 options) sold separately.
45 lbs.
JK-47F
|
|
|
::LICENSE PLATE HOLDER |
|
The Kilby Removable License Plate Holder is the easy way to attach your license plate to the roller fairlead. Made from .090 aluminum and powder coated in a satin black finish, the holder securely clips to the rollers. When you need to use the winch, the mount pops completely off without tools. Assembly is simple and 100% bolt-together.
Installation Notes:
- Fits full size roller fairleads only.
2lbs. 12x10x4
LPH
|
|
| |
::JK Hawse License Plate Adapter Bracket |
|
Hawse Fairlead Adapter for Part # LPH
The JK Hawse License Plate Adapter Bracket is designed for use with Kilbys clamp-on License Plate Holder # KE-LPH. The adapter simply slides behind the Hawse Fairlead and provides a seating surface for the plate holder clamps. The adapter is powder coated in a durable wrinkle black finish. No additional hardware is necessary. Installation is simple and 100% bolt-on. Installation Notes:
- Fits Kilby Bumpers & most vehicles with “Hawse Type” fairleads.
2 lbs. 12 x 6 x 4
JK-HLPA
|
|
| |
::JK FRONT STINGER BAR |
|
The Trail Boss Series bolt-on front bumper stinger, # JK-ST1, for the 2007- 2009 Jeep Wrangler (JK) is manufactured from .120 wall x 1.75” diameter DOM steel tube with 3/16” gusset plates and finished in a durable satin black powder coat. The Kilby Front Bumper Stinger provides additional front protection while enhancing your Jeeps rugged looks. The Stingers are built to be used in conjunction with Kilbys “Trail Boss” series front bumpers.
Installation Notes:
- Uses 2 bolts per side (4 bolts total).
- Requires some drilling (four ½” holes).
- Use with Kilby “Trail Boss” bumper only.
JK-ST1
|
|
| |
::JK SKID PLATES |
|
JK Skid Plate This skid plate is made to attach to the Kilby “Trail Boss” front JK bumper with no modifications. Made from 3/16” steel and finished in a satin black powder coat, this plate provides maximum protection for the front of your JK while maintaining ground clearance. The skid plate includes a pair of bolt-on end plates to keep debris out and provide a clean finished appearance. Installation Notes:
- 100% bolt-on installation.
- To be used in conjunction with Kilby Trail Boss Front Bumper only.
36 lbs. 41x17x7
JK-47F-SP1
[View Instructions]
|
|
JK Skid Plate - High Clearance Version This skid plate is made to attach to the Kilby “Trail Boss” front JK bumper after removing the factory “bash bar” for additional ground clearance. Made from 3/16” steel and finished in a satin black powder coat, this plate provides maximum protection for the front of your JK while increasing ground clearance. The skid plate includes a pair of bolt-on end plates to keep debris out and provide a clean finished appearance.
Installation Notes:
- 100% bolt-on installation.
- To be used in conjunction with Kilby Trail Boss Front Bumper only.
43 lbs. 41x17x7
JK-47F-SP2
[View Instructions]
|
|
| |
JK BELLY AND ENGINE SKIDS NEW! |
|
Don't get caught without protection! Kilbys new Belly and Engine Skid Plates for the Jeep JK provide maximum undercarriage protection without sacrificing ground clearance. The 3/16” thick steel skid plates provide a smooth surface for gliding over obstacles while protecting vital engine and drive train components. The engine skid plate can be used in conjunction with the factory belly skid if desired. The Kilby Belly Skid Plate can also be used with or without the engine skid plate.
|
|
|
The Kilby JK Belly Skid Plate is made from 3/16” steel and replaces the factory belly skid with a heavier duty trail-ready unit that provides maximum protection and increased ground clearance. The skid comes in raw steel that is ready for paint or powder coating if desired. Installation is simple and 100% bolt-on.
Installation Notes:
- 100% bolt-on.
- Can be used with or without engine skid plate (JK-ESP).
34 lbs. Bare Steel (Shown Powder Coated in Photo)
JK-BSP
|
|
The Kilby JK Engine Skid Plate is made from 3/16” steel. The skid plate protects the engine oil pan from rock impacts without sacrificing ground clearance. The skid comes in raw steel that is ready for paint or powder coating if desired. An access opening with a splash shield to prevent pooling on the skid is provided for oil changes. Installation is simple and 100% bolt-on. Optional side plates (sold separately) can be added for increased protection.
Installation Notes:
- 100% bolt-on.
- Works with factory belly skid plate.
- Can be used with or without Kilby Belly Skid Plate (JK-BSP).
51 lbs. Bare Steel (Shown Powder Coated in Photo)
JK-ESP
[View Instructions]
|
|
| |
::JK ENGINE SIDE SKID PLATES |
|
The Kilby JK Engine Side Skid Plates are made from 3/16” steel. The skid plates are made to provide additional side protection to the Kilby Engine Skid Plate from rock impacts without sacrificing ground clearance. The skids come in raw steel that is ready for paint or powder coating if desired. Installation is simple and 100% bolt-on.
Installation Notes:
- 100% bolt-on.
- Installation requires Kilby Engine skid plate (JK-ESP).
25 lbs. Bare Steel
JK-ESSP
|
|
| |
::JK MUFFLER SKID PLATES |
|
The Kilby JK Muffler Skid Plate is made from 3/16” steel. The skid plate protects the rear mounted muffler, which is extremely vulnerable to rock impacts, without sacrificing ground clearance. The muffler skid fits vehicles with the factory tow hook or hitch. The plate is powder coated in satin black to blend in under your Jeep. Installation is simple and 100% bolt-on.
Installation Notes:
- 100% bolt-on.
- Can be used with factory rear tow hook or hitch.
47lbs. 40x17x6
JK-MSP
[View Instructions]
|
|
JK Muffler Skid Plate for AFE “High Tuck” Exhaust System NEW!
This skid plate is identical in construction to our regular muffler skid with the exception of the width. The “HT” version is designed specifically to work with Advanced Flow Engineering's (AFE) new “High Tuck” JK Exhaust System and is a full 5.5” narrower, which allows additional clearance. Installation is simple & 100% bolt-on. Installation Notes:
- 100% bolt-on.
- Can be used with factory rear tow hook or hitch.
47lbs. 40x17x6
JK-MSP-HT
|
|
| |
::JK SHOCK SKIDS |
|
Kilby JK Rear Shock Skid Plates are made from 3/16” steel. The skid plates protect the rear shocks from rock impacts without sacrificing ground clearance. The plates have a built in rock slider surface to keep you moving through the roughest of trail sections. The skids are powder coated in a satin black finish. Installation is simple and 100% bolt-on.
Installation Notes:
- 100% bolt-on.
- Can be used with up to 2.25” diameter shocks.
10 lbs. 14x9x9
JK-RSS
[View Instructions]
|
|
|
::JK REAR INTERIOR STORAGE RACK NEW! |
|
Kilby's Rear Interior Storage Rack is designed specifically for the JK Unlimited. Fabricated from welded 1” square steel tubing with a welded expanded metal floor and finished in black texture powder coat, this rack is built to take it! The rack mounts securely inside the JK to provide 2 layers of storage space for maximum functionality. The rack measures 42” wide by 27” deep, with 4” tall sides. Installation is simple and 100% bolt-on.
Installation Notes:
- 100% bolt-on.
- For Unlimited (4 door) models only.
- Fits both hard and soft top models.
41 lbs. 50x33x5
JK-R1
[View Instructions]
|
|
|
::JK FLOOR KIT NEW! |
|
The JK Rear Floor Kit is designed specifically for the JK Unlimited. Fabricated from heavy 14 gauge steel and finished in texture black powder coat, this flooring is tough! Remove the rear seats and mount the flooring kit to provide a flat surface in the full rear cargo area for maximum interior carrying capabilities. The floor plates are hinged and can be flipped up to increase front cargo depth when needed. Installation is simple and 100% bolt-on.
Installation Notes:
- 100% bolt-on.
- Tie down eyelets shown are not included.
- For Unlimited (4 door) models only.
- Requires factory rear seat removal.
3 lbs. 50x33x5
JK-FK
|
|
|
|
|
The JK Radio Rack is designed to provide a secure and stable overhead mounting surface for CB radios, auxiliary lighting, or other accessories. Fabricated from heavy 14 gauge steel and finished in black texture powder coat, the rack has an integral raceway to keep accessory wiring secure and out of sight. Installation is simple and requires only minor drilling.
Installation Notes:
- Minor drilling required.
- Fits hard and soft top models.
23 lbs 40x17x6
JK-RR
|
|
|
::JK SEAT PANELS NEW! |
|
The JK Front Seat Panels are fabricated from heavy 14 gauge steel and finished in black texture powder coat. The panels close the unsightly openings under the front seat sides for a finished look and shield any electrical components you may mount under the seats. Installation is simple and 100% bolt-on.
Installation Notes:
- 100% bolt-on.
- Includes outer covers only for front driver and passenger seats.
- Some late 2008 models will require part # JK-SP2. To
determine which panel set you need, simply look at the seat opening on
each side. The
JK-SP utilizes two different height panels. The JK-SP2
utilizes two identical height panels.
4 lbs. 25x4x4
JK-SP (2007-'08)
4 lbs. 25x4x4
JK-SP2 (2009)
|
|
|
::JK REAR CARGO PANELS NEW! |
 |
2 Door 2007 - '09 JK The JK Rear Cargo Panels are fabricated from heavy 14 gauge steel and finished in black texture powder coat. The panels fit neatly around the roll bar and seat belt mounts. The contoured design closes the openings under the rear bed rails for a finished look. The panels can be drilled to facilitate mounting a variety of electrical outlets and accessories. The panels also provide a protected path for electrical wiring. Installation can be simplified with the addition of our optional Hard Top Bolt kit, part # HTK1.
Installation Notes:
- Fits 2 door hard top models only.
- Panels come blank.
- 100% bolt-on.
- Includes covers for driver and passenger sides.
|
| |
|
| |
4 Door 2007-'09 JK The JK Rear Cargo Panels are fabricated from heavy 14 gauge steel and finished in black texture powder coat. The panels fit neatly around the roll bar and seat belt mounts. The contoured design closes the openings under the rear bed rails for a finished look. The panels can be drilled to facilitate mounting a variety of electrical outlets and accessories. The panels also provide a protected path for electrical wiring. Installation can be simplified with the addition of our optional Hard Top Bolt kit, part # HTK1.
Installation Notes:
- Fits 4 door hard top & soft top models.
- Optional accessories shown. Panels come blank.
- 100% bolt-on.
- Includes covers for driver and passenger sides.
|
|
| |
:: JK EVAP CANISTER RELOCATION KIT |
|
The JK Evaporative Canister Relocation Kit is designed to place the susceptible plastic canister up and out of harms way. All brackets are made from heavy-duty steel and plated for corrosion resistance. Once installed, the kit provides extra room for aftermarket accessories. All necessary parts are included in the kit. The kit is required for clearance on any 2 door JK prior to installing our On Board Air kit. Installation is simple and 100% bolt-on.
Installation Notes:
JK-EV
[View Instructions]
|
|
| |
::JK HOODLIFT |
|
Finally, a simple fix for what many Jeep owners consider to be a “factory oversight”. The JK Hood Lift eliminates the need to fight with the factory prop rod when raising the hood. After installation, raising the hood becomes a simple one-handed operation. The Hood Lift can also be adjusted for increased under-hood access! The kit comes complete with all necessary hardware. Installation is simple and requires only minor drilling.
Installation Notes:
- Requires minor drilling
- For factory hoods only. If using a heavier aftermarket hood, contact us for a vehicle-specific kit.
3 lbs. 18x4x4
HOODLIFT JK
|
|
|
::JK HARD TOP BOLT KIT |
|
The JK Hard Top Bolt Kit makes top removal easier than ever. The aircraft quality wing style bolts are simple to install and include stainless steel washers. The bolt kit also provides quick access when used in conjunction with our Rear Cargo Panel Kit. The bolt kit includes 6 replacement hardtop mounting bolts and flat washers. Installation is quick and simple.
Installation Notes:
- Torx Bit Socket required for factory bolt removal.
HTK1
|
|
|
:: JEEP DESKTOP METAL ART
Made from 11 gauge steel, powder coated black. This desktop metal art will remind you all day long that you'd rather be on the trail! Just use it for decoration, or put it to work by holding envelopes & buisness cards.
MA-001
|
