The Kilby “Rackstrap” is a versatile cinch system specifically designed to protect the item being restrained from damage from contact with the ratcheting buckle. This is accomplished by the addition of an integrated secondary adjusting strap, which allows you to position the buckle away from corners or edges. The strap measures 84” fully extended and 21” fully retracted.

The “Mini Softstrap” wraps around 1” diameter tube and provides a secure, non-scratching mounting point for the Rackstrap hooks.

Installation Notes:

• Available in green only.

KE-RS1

The “Mini Softstrap” wraps around 1” diameter tube and provides a secure, non-scratching mounting point for the Rackstrap hooks.

Installation Notes:

• Available in green only.

KE-MSS1

The Kilby Removable License Plate Holder is the easy way to attach your license plate to the roller fairlead. The holder securely clips to the rollers. When you need to use the winch, the mount pops completely off. Installation is simple and 100% bolt-on.

Installation Notes:

• Fits roller fairleads only.
• 100% bolt-on.

2lbs. 12x10x4
LPH

• Fits Jeeps and other vehicles with a ½” wheel stud.
• 100% bolt-on.

The Jackstrap is designed to limit suspension extension when you lift your vehicle from the bumper or another point other than the axle. This reduces the amount of lifting needed to raise a tire off the ground, which improves safety. The strap is simply applied prior to lifting, and removed once the vehicle is back on the ground. The strap is universal and may require additional attachment points.

• For vehicles up to 5000 pounds.
• WARNING: Stay clear from underside of vehicle when strap is in use.

The Rimrock brand Rapid Air Down valve Stems (“RADS”), utilize a larger diameter valve stem to enable faster air-down times. When installed in addition to the factory stem, you can monitor the pressure from the factory stem during the air-down process. RADS can also, in most cases, be installed as a replacement for the factory stems. Sold in sets of 5.

Installation Notes:

• Drilling required if installed in addition to factory stems.

1lb 7x5x3
RAD-5

These Power Plugs are ideal anywhere a quick-disconnect can be used. Use on your winch, portable compressor, jumper cables, or other accessory to make it more versatile and portable. They are rated at 175 amps and are compatible with most manufacturers' similar connectors.

Installation Notes:

• Sold in pairs.
• Works with 2-4 gauge wire.

Sold in pairs.
1lb 7x5x3
PP001

Used internationally in military and aircraft applications, these switches and covers are top-notch! The switches are dust and moisture proof and do not require a rubber boot to seal out the elements. The terminals are silver plated for maximum conductivity. Great for use with auxiliary lights, compressors, and accessories.

Installation Notes:

• Standard on/off SPST toggle.
• 15 amp rating.

Used internationally in military applications, these terminals are the best! The terminals feature a thick lead body with reversible bolts for versatility. The basic shape is for A26 type battery posts. A side post adapter (listed below) is also available.

Installation Notes: